Circle Cutter double blade (Kanzawa)
The double blade circle cutter from Kanzawa is for cutting holes between 40mm and 200mm in diameter, with a maximum depth of 30mm.
Description
A double blade circle cutter for cutting holes between 40mm and 200mm in diameter, with a maximum depth of 30mm, ideal for use on fibre cement, plywood, plaster board, plastic, etc. Features include:
- Hole diameter is easily adjustable with the wing nuts
- Accepts 10mm drill chucks
- To be used with a drill stand or a drill press
- Allen key and spare washers included
- Tungsten Carbide tipped blades
*PLEASE DO NOT USE ON SOLID WOOD OR MDF.
NB: Replacement parts available
Important:
- Always follow the chart below or on the back of the packet to adjust the rpm considering the hole diameter
- Please be aware these speeds are a suggestion from the manufacturer only
- Always keep your hands away from the spinning cutter and always wear eye protection
- Always keep the tool straight, never at an angle, so the two cutting blades contact the surface at the same time
- Always tighten the wing-nuts securely before boring into any surface
| Hole Diameter(mm) | ⌀40-49 | ⌀50-69 | ⌀70-89 | ⌀90-119 | ⌀120-200 |
| rpm | 1000 | 800 | 600 | 400 | 300 |
Shipping
Our warehouse is based in Nelson, New Zealand, and all transactions are charged in New Zealand dollars.
Shipping within New Zealand is charged at NZD $15 (non-rural) or NZD $17 (rural), including GST, for most products (some exceptions apply). This excludes Great Barrier Island, Waiheke Island, the Chatham Islands, D'Urville Island, and Stewart Island.
All items from a single order will be shipped together. If multiple orders are placed on the same day, by the same person, to the same delivery address, we will do our best to combine them into one shipment, unless otherwise instructed.
If you have any questions, please contact us directly at sales@piranhatools.co.nz.