Adjustable Spade Bit with adjustable 70 - 110mm diameter (Kanzawa)
The adjustable spade Bit bit from Kanzawa is designed to drill holes between 70 - 110mm diameter in softwood, plywood, plaster board, etc.
Description
An adjustable spade Bit bit designed to drill holes between 70 - 110mm diameter in softwood, plywood, plaster board, etc, with a maximum drilling depth of 130mm. Features include:
- Tool wrench included
- Adjustable blade screw size
- Accepts 13mm drill chucks
- To be used with a power drill, drill press or brace drill with 3 jaws
*Replacement parts available
Important:
- Please follow the chart printed below or on the back of the blister to adjust the rpm considering the hole diameter
- Please be aware these speeds are a suggestion from the manufacturer only
- Always keep your hands away from the spinning cutter
- Always wear eye protection
- Always keep the tool straight and never at an angle
- Do not set the blade outside the graduation indicated on the blade
- Drill in a clockwise direction only - do not use counter clockwise direction
| Hole Diameter(mm) using big blade | ⌀15 | ⌀25 |
| rpm | 600-700 | 380-450 |
| Hole Diameter(mm) using small blade | ⌀25 | ⌀45 |
| rpm | 380-450 | 200-250 |
Shipping
Our warehouse is based in Nelson, New Zealand, and all transactions are charged in New Zealand dollars.
Shipping within New Zealand is charged at NZD $15 (non-rural) or NZD $17 (rural), including GST, for most products (some exceptions apply). This excludes Great Barrier Island, Waiheke Island, the Chatham Islands, D'Urville Island, and Stewart Island.
All items from a single order will be shipped together. If multiple orders are placed on the same day, by the same person, to the same delivery address, we will do our best to combine them into one shipment, unless otherwise instructed.
If you have any questions, please contact us directly at sales@piranhatools.co.nz.